Do you know the proper way to open a jaw crusher

　　First, before inst ing jaw crusher, it is necessary to carefully check whether the inst ation position is in line with the design drawings. If there is a difference, it is necessary to adjust in time to avoid problems.

　　Second, when adjusting the jaw crusher feed port, the spring parts of the equipment should be removed *, the spring should be inst ed after the * debugging of the size of the discharge port, and the degree of tightness should be adjusted to ensure the efficiency of jaw crusher.

　　Three, after adjusting the jaw crusher feed port, it is necessary to use cement to fix the base of the machine. Because the jaw crusher gener y works in the place where the soil is easy to loosen, there will be deviation phenomenon when the machine is running. In addition, it is necessary to ensure the stability, integrity and level of the frame when inst ing.

　　Four, jaw crusher in operation, to manu y pull the pulley, in order to ensure the normal operation of the equipment can open the jaw crusher for idling, gener y the actual need to ensure a certain amount of time, when the test machine should pay attention to listen to whether the machine has noise, oil leakage phenomenon, if goes well, the inst ation is successful.

　　Five, in the whole production line, jaw crusher plays a key role, but it also needs other equipment to cooperate, so as to form a set of production line, so as to realize the benefits of the production line.

　　Six, if the above work is normal, then you can debug jaw crusher work, the general debugging time is relatively long, as far as possible to control in about 10 hours, in order to test the of its equipment, you can prepare some solid materials for test in advance, if some are normal, so long can form y carry out production.