How to operate the sand making machine correctly

　　After the equipment is inst ed, it is necessary to perform no-load and on-load operation to test the stability of the equipment. During these two processes, it is mainly to check the operation of the bearings, fastening bolts, flywheels and other components, and whether there is any abnormality inside the machine. Sound and other phenomena, if there is any abnormal phenomenon, it needs to be s*ped in time for processing.

When the sand making machine starts, the equipment in the entire production line be turned on in sequence, and when starting, the current of the control system should be observed. When the equipment is just started, the current will rise sharply. This is an instantaneous current, which is a normal phenomenon, but If the current remains high for a long time, you should s* the machine immediately to check the equipment and circuit. In addition, if there is a fault in the production of the machine, you need to s* the machine in time to deal with it.

　　When the sand making machine is in use, the wear-resistant parts will wear out. Therefore, these wear-resistant parts need to be checked and replaced regularly. During the production of the machine, it is strictly forbidden to enter materials larger than the rated size, and the feeding should be carried out continuously and evenly. , so as to obtain good production efficiency.

　　When the sand making machine is in use, the maintenance be in place, and a special person needs to be assigned to be responsible. During the maintenance period, the power of the whole machine should be turned off to ensure the safety of maintenance.